The Kontrol panel 800 is based on user friendly approach, can be selected and its
maintenance can be done without technical knowledge, it is composed with two element:
– Kontrol 800 Control Instrument is a dedicated multi-parameter controller for
complex applications that require a number of chemical parameters to be checked at
the same time
– Transparent Hydraulic PSS-Plexi probe holder with Volumetric Flow-meter with a
range from 10 to 100 litres/hour, with external reed sensor for proper flow rate
between 70 and 90 litres/ hour.
Technical Characteristics:
Electronic Device Kontrol 800
• Power Supply: 100-240 Vac 50/60 Hz, 15Watt (Class 1
Electrical Insulation)
• System duration: 24 hours a day, 7 days a week for 5 years
• Operating temperature: 0 to 40°C, relative humidity 0 to 95%
(without condensation)
• Data display: alpha numeric display with backlight .
• Keyboard: 7 Keys
• Cable connections: Dual row connectors
• Relays:
o Six (250 Vac 7 A); four 100 to 240V Power relays and
two dry contact relays
o Output Modules associated with the chemical
measurements:
o 2 channel current output, 0/4 to 20mA, 500 Ohm
maximum load (precision ± 0.01 mA)
o 2 channel Frequency Output (Open Collector
NPN/PNP) 0 to 120 pulses per minute (precision
0.016 Hz)
• Input Modules:
o Flow (pull up) (input for Reed sensor)
o Hold
o Data transmission modules:
o RS485 Serial Port (ModBus Standard Protocol)
• Modules integrated upon the mother board:
• Clock module with backup battery
By pass probe holder PSS-Plexi:
• In/Out: 8×12 mm (tube)
• Material Plexiglas without color
• Hydraulic – By Pass
• Pressure 5 bar
• Temperature 60°C
